RCA Pro848 - Manual (Page 15)

Powering Your Camcorder
13
Attach Adapter/Charger
1 Press the PUSH button to open the
battery compartment. Carefully open
the compartment fully.
2. Plug one end of the optional DC cable
into the DC OUT jack on the adapter/
charger and the other end into the DC
IN jack on the camcorder.
3. Close the battery compartment. Press
the PUSH button to lock the battery
compartment shut.
4. Plug the AC adapter/charger power
cord into an AC operating outlet. The
adapter/charger’s POWER indicator
lights.
Remove the Adapter/Charger
1. Unplug the adapter/charger from the
wall outlet.
2. Disconnect the DC cable from the
camcorder and adapter/charger.
Using Optional AC Plug Adapter
An optional plug adapter may be
required in some countries.
1.
Plug the adapter/charger’s plug into
the AC plug adapter.
2. Plug the AC plug adapter into the
AC outlet.
Power the Camcorder
The optional CPS801C AC adapter/charger and optional DCC100 DC cable let
you power your camcorder directly from standard household power. It
operates on 100-240 volts, 50/60 Hz, so it can be used virtually anywhere in the
world to power the camcorder or recharge your battery pack. You may need a
plug adapter in some countries. Consult your dealer.
Caution: Do not use this adapter/charger for
any purpose other than charging recommended
battery or supplying power to the camcorder.
Optional AC
Plug Adapter
AC 100-240V
To AC 100-
240V, 50/60 Hz
Adapter/Charger
DC Cable
DC IN Jack