RCA Pro848 - Manual (Page 17)

15
Remote Control
The remote operates the camcorder by infrared light, so it is protected from electrical
and sound interference. However, the remote must be aimed directly at the
camcorder’s remote sensor. There cannot be any obstructions between them.
Remote Control Sensor
Note: The camcorder may not respond to
the remote if its sensor is exposed to direct
sunlight or strong artificial light.
Remote Sensor
When you are not using the remote control you may want to store it in the remote
control holder located in the camcorder’s battery compartment.
Store the Remote Control
1. Press the PUSH button to open the
battery compartment. Carefully open
the compartment fully.
2. Insert the remote control in the
remote control holder and click it
into place as shown.
Remove the Remote Control
1. Press the PUSH button to open the
battery compartment. Carefully open
the compartment fully.
2. Carefully pull back the remote
control holder, and lift the remote
control as shown.
Storing the Remote Control
Remote
Control
Holder
Remote
Control
Holder