RCA Pro848 - Manual (Page 38)

36
Playback
Model Pro848 Only: Playback on TV (or VCR) with
AUDIO/VIDEO IN Jacks
To connect your camcorder to a TV monitor (or VCR) with AUDIO/VIDEO IN jacks,
you will need the supplied audio/video cable. If your TV is already connected to a
VCR, you can attach the camcorder to the VCR and watch what the camcorder is
recording or playing on the TV.
(continued on next page)
IN
OUT
AUDIO
L
R
VIDEO
AUDIO
IN
VIDEO
IN
AUDIO
IN
L
R
VIDEO
IN
Back of
Mono VCR or
TV Monitor
Back of
Stereo VCR or
TV Monitor
Yellow Video Plug Audio/Video
Cable
Audio/Video
Cable
White and Red
Audio
Plugs
White and Red
Audio
Plugs
White and Red
Audio
Plugs
White and Red
Audio
Plugs
Yellow
Video
Plug
OR
Optional
Y-Adapter
Yellow Video Plug
Audio/Video IN/OUT Switch
Yellow Video Plug
Audio and Video Jacks
Located Behind A/V Cover
Installation
1. Attach the white and red plugs on one
end of the audio/video cable to the red
and white AUDIO IN jack on the TV
(or VCR).
Notes: If your TV (or VCR) only has one
AUDIO IN, you may need an optional Y-
adapter to hear both channels.
2. Attach the yellow plug to the VIDEO
IN jack on the TV (or VCR).
3. Attach the white and red plugs on the
other end of the audio/video cable to
the white and red AUDIO L and R
jacks (located behind the A/V cover)
on the side of the camcorder.
4. Attach the yellow plug to the yellow
VIDEO jack on the camcorder.
5. Place the audio/video IN/OUT switch
(located on the side of the camcorder)
in the OUT position.