Regency ALTERRA CS1200 - Manual (Page 17)

Regency CS1200 Freestanding Wood Stove
17
INSTALLATION
ASH DRAWER OPTION
2) Remove the bricks from the fl oor of the fi rebox.
5) Position ash drawer lid in 'Open' position on the ash drawer lid (towards
the front) as shown below.
6) Slide in ash drawer.
7) Close center door and main top door- once ash drawer is in place.
Keep ash removal tool handy for maintenance - see ash disposal in
operating instructions.
1) Open the main top door and the center door on the front of the unit.
3) Remove the ash dump cover plates (one inside the fi rebox and one on
the underside of the fi rebox - access the lower plate through the center
door - it is directly below the upper ash dump plate.) by removing the
two nuts and bolts holding the 2 plates together from underneath the
stove.
Ash Dump Plates Ash Plug
4) Push the ash plug into the hole inside the fi rebox and replace all the bricks
except for the brick over the ash plug. See brick diagrams in manual.
Ash drawer
lid