Ricoh 3232 - Manual (Page 40)

Faxing
32
2
Mixing Scan Settings for a
Multiple Page Original
When sending an original of several
pages, you can select a different im-
age density, resolution, and original
type setting for each page.
Place the original, select the scan set-
tings for the first page, dial, and then
press the
{{{{Start}}}} key as you would
normally. Then follow one of the fol-
lowing two procedures.
Note
❒ It is recommended that originals
be placed on the exposure glass
when mixing scan settings for a
multiple page original.
When placing originals on the exposure
glass
Note
❒ While the machine is beeping, you
have about 60 seconds (10 seconds
for Immediate Transmission) to se-
lect density, resolution, and origi-
nal type. The remaining time is
shown on the display.
AAAA
Check which pages you want to
scan with different settings.
BBBB
Remove the previous page and
place the next page.
CCCC
Select the image density, resolu-
tion, and original type.
Note
❒ Adjust the settings for each page
before you press the
{{{{Start}}}} key.
When placing originals in the optional
Auto Document Feeder
Note
❒ Depending on what time the scan
settings are adjusted, the settings
may not be reflected in the result-
ing operation.
AAAA
Check which pages you want to
scan with different settings.
BBBB
Select the image density, resolu-
tion, and original type before the
next page is scanned.
ThemisC1_Fax_GB-F_FM.book Page 32 Wednesday, November 24, 2004 7:09 PM