Ricoh 3232 - Manual (Page 44)

Faxing
36
2
AAAA
Press to switch the destina-
tion to IP-Fax destination.
BBBB
Press [Manual Input].
Note
❒ You can manually enter the des-
tination using the ten keys.
CCCC
Enter the IP-Fax destination and
then press [OK].
Note
❒ If you have set both of “Enable
H.323” and “Enable SIP” pa-
rameters to “On” with “IP-Fax
Settings” under “Facsimile Fea-
tures”, [Protocol] appears. Press
this button to select a protocol
to be used.
❒ If you enter an incorrect charac-
ter, press [Backspace], or [Delete
All]
. Then, re-enter the character
correctly.
❒ To change the IP-Fax destina-
tion after pressing [OK], press
[Edit Dest.]
, re-enter an IP-Fax
destination, and then press [OK].
Reference
“Entering Text”, General Set-
tings Guide
The destination is specified.
Note
❒ Press [ProgDest] in this order to
store the entered IP-Fax destina-
tion in the Address Book. See
p.37 “Registering Entered Des-
tinations to the Address Book”.
- - - -IP-Fax Destination
Depending on the network to which
this machine is connected or this ma-
chine's configuration, enter the IP-Fax
destination as follows:
❖ ❖ ❖ ❖ When not using a gatekeeper/SIP
server
• From IP-Fax to IP-Fax
Specify the IP address or host
name of the receiving machine.
Example: IP address: 192.168.
1.10
Example: Host name: tokyo.
abc.co.jp
• From IP-Fax to G3 fax
Specify the G3 fax telephone
number of the receiving ma-
chine.
Example :0312345678
ThemisC1_Fax_GB-F_FM.book Page 36 Wednesday, November 24, 2004 7:09 PM