Radio Shack Pro-97 1,000 - Manual (Page 78)

78
Beyond the Basics
3. Press ENT.
When activated, ID delay watches the control channel
command for the delay time when the signal disappears
from the voice channel.
reviewing locked-out talk group IDs
You cannot clear all lockouts from a talk group at the same
time.
1. Press PGM then TRUNK.
2. Press FUNC. Then L/OUT. The locked out ID appears. If the
ID memory bank has no locked-out ID, you hear the low
beep tone.
clearing talk group IDs
1. Press PGM then TRUNK.
2. Press FUNC, e or d to select ID memory.
3. Press FUNC then CL.
clearing all talk group IDs in a single bank
You can clear all talk group IDs within a bank. This lets you
quickly delete all talk group IDs from a bank if you want to
use the bank to store different data (such as a new set of talk
group IDs).
1. Press PGM.
2. Press TRUNK to enter a talk group ID memory mode.
3. Select a talk group ID bank using FUNC, e or d .
4. Press FUNC then 6. Clear entire list ? Press 1 to clear all, any other
key aborts appears.
5. Press 1 to clear all talk group IDs within a bank. List cleared.
Notes Notes