Ryobi AIRgrip Procross Laser level self leveling ELL0006 - Manual (Page 8)

8
ASSEMBLY
UNPACKINg
This product has been shipped completely assembled.

Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-55-579 for assistance.
PACKINg LIST
WARNINg:
If any parts are damaged or missing do not operate
this product. Please return to the place of purchase or
call 1-800-55-579 for assistance.
WARNINg:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
OPERATION
WARNINg:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNINg:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:

Aligning multiple pictures on a wall
 Aligning wallpaper borders or chair rails
 Lining up floor or wall tile
INSTALLINg BATTERIES
See Figures 3 - 4.
There are two battery compartments for the laser level, one
for the AIRgrip vacuum and one for the laser.
To install batteries for the AIRgrip vacuum:

Locate the battery compartment on the base of the laser
level and remove the battery cover plate.
Fig. 3
 Install two AA batteries according to polarity indicators
(+ or −) inside the battery compartment.
 Reinstall the battery cover plate.
To install batteries for the laser:

Rotate the line height adjustment knob to raise the laser
lens housing to its highest position.
BATTERy COVER
PLATE
AA BATTERIES
Crosshair Laser Level
AA Batteries (4)
Rough Surface Adaptor
Multi-Function Base
Push Pins () Hook-and-Loop Strap
Tripod Adaptor
Case
Operator’s Manual