Ruckus Wireless MM2211 - Manual (Page 28)

28 MM2211 Wireless Broadband Gateway User’s Guide 8000013, July 2006
Configuring the MM2211 Gateway
LAN Interface LAN interface configuration provides the selection of the IP address assignment from
the Local Area Network. This is the IP address that the home users will use to access
the Web Interface.
DHCP Server Selecting the DHCP Server will allow the Metro Wireless Access Gateway to act as a
DHCP server to assign IP address to PC's connected to the Wireless Access Gateway.
NAT Selecting NAT (Network Address Translation) will perform all address translation from
the internal IP address to external IP address.
User Name The user name. The default user name is admin. If you change the user name, make
sure to write it down for future reference.
Password / Confirm The user password. The default is password. If you change the password, make sure
to write it down for future reference.
Table 7—System Configuration—Route Mode (Continued)
Field Description