Ringdale Fax Receiver MFR-200 - Manual (Page 11)

Copyright  2006 Ringdale User Manual, 62-15820000 Page 11 of 28
Your Network Administrator should provide the Unit IP and Unit Gateway address.
1) This unit IP address .......... 011.022.033.044 – should be changed to an
unused IP address on your network. This IP address should be added to your
DHCP Server’s static IP address list.
2) Gateway Address ............... 011.022.033.001– should be changed to the IP
address of your default gateway. Typically, this is the lowest address on the
subnet, for example 192168100.001.
3) DHCP/RARP – This is a toggle. Entering 3 will switch from Disabled to Enabled
and back.
NOTE: If you use DHCP you must figure out what IP address it obtained. Methods
for doing this are covered in the troubleshooting section.
Q) Press Q when you have the IP addresses configured.
STEP 4 Enter a 2 to setup the SMTP Mailserver.