Ringdale Fax Receiver MFR-200 - Manual (Page 8)

Copyright  2006 Ringdale User Manual, 62-15820000 Page 8 of 28
Installation where an outgoing fax machine is required on incoming line:
NOTE: If you daisy chain from an outgoing fax machine, it should be set to either
not auto answer or answer after 4 rings or more so that the fax receiver will pickup
first.
NOTE: You should also set the fax machine to tone dialing and not pulse dialing.
Pulse dialing causes voltage spikes on the line that can be mistaken for an incoming
ring, and the FaxReceiver will attempt to answer.