RightWay GPS Navigator RW 200 - Manual (Page 34)

34
ADJUSTING THE POI SETTINGS
You can choose when to have POIs shown on screen and the distance at which you
are alerted to them by adjusting the POI settings.

Tap Menu > Settings > Next> POIs.

Enable the POIs by checking the box. Disable by un-checking.

Choose to Show POIs Always, Never or When Stopped from the drop
down menu.

In the Report POIs this far ahead field, select a distance between 0.2
and 25 miles.

Select whether to show POIs that are on your route or nearby it by
checking one of the options.

Select specific POI categories to display by checking the boxes.

Tap OK to apply the settings and return to the Settings menu.
SETTING DETOURS
You can program your RW 200 to make a detour on a part of the calculated route.

Select Menu > Detour.

From the Detour options, select Avoid Roads.

An itinerary of your trip will appear. Click on the road you would like to
avoid then select Avoid Road.

The RW 200 will take a few moments to plan an alternative to the
selected road, and then announce any change in distance the new route
will cause to your trip, and display a map of the new route.

Tap Accept and the RW 200 will begin directing you according to the
new route.

If you decide not to use the new route, select Decline. The RW 200 will
then return to your original route.
The RW 200 will save the details of roads you wish to avoid. To clear the memory,
select Menu > Detour > Clear Avoided Roads.