RightWay GPS Navigator RW 200 - Manual (Page 38)

38
ADJUSTING YOUR SAFETY VIEW
Tap Menu > Settings > Next> Driver Safety. From here you can alter the settings of
the Safety View in the following ways:

Display Map Near Turns: Decide whether to show a 2D/3D zoomed
map on the approach to each turn or always show the Driver Safety
screen. Check the box for Yes to display the map or No not to.

When the Turn is Within: If you selected Yes above, choose the
distance before the turn you would like the map to be displayed. The
distance can be set between 0.3 miles and 1 mile.

Map Type: If Display Map Near Turns is set to Yes, select whether to
use a 2D or 3D map when approaching turns.

Tap OK to save your new settings and exit. Tap Cancel to discard your
changes.
TRACK PLAYBACK
You can play back a previously completed trip.

Tap Menu > Settings> Next > Track Playback.

Select the trip from the list.

Tap Play to start playback.

Adjust the playback speed using the up and down arrows next to the
Track Playback Speed field. The available speeds are between 1.O X
and As Fast As Possible.

To stop playback, tap Stop.

To exit, tap Cancel.
ADJUSTING THE VOLUME
Tap Menu > System > Next> Volume.
Use the + and - symbols to increase or decrease the volume of the spoken
instructions.
To turn off the „tap‟ sound which occurs when you touch the screen,
uncheck the box marked Enable sounds for taps.