Rio Audio Advanced Digital Audio Center - Manual (Page 104)

102 | FAQ and troubleshooting
FAQ and troubleshooting
Problem: I’m unable to view the contents of the Rio Advanced Digital
Audio Center via the included emplode software.
Troubleshooting measures:
1. The Rio Advanced Digital Audio Center is password protected to prevent any
unauthorized access. On the Rio Advanced Digital Audio Center, press the
Menu button, then navigate to Setup menu > Enter emplode password.
2. Select the box titled ’Allow emplode to connect over network’.
3. Enter a Password in the field provided, then select ’Done’.
4. In the emplode software on your PC, enter the same password for access to
the unit.
Problem: All my MP3’s are encoded at 192Kbps. Is there a way I can
change that value?
Troubleshooting measures:
1. By default, the Rio Advanced Digital Audio Center is set to encode at
192Kbps. To change the value, press the Menu button, then navigate to Setup
menu > Recording quality > Customize standard recording settings.
2. Choose from the 3 options available, or select ’Advanced’ to view a larger list
of choices you can select from.
Problem: I decided that I no longer want to create an MP3 for a
portable device. What steps can I take to prevent future recordings,
and delete the existing Portable content?
Troubleshooting measures:
1. To disable Portable Copy Recording, press the Menu button, then navigate to
Setup menu > Recording quality > Customize Portable recording settings.
2. Enable the option ’Disable Portable Copy Recording’.
3. To delete the Portable content, navigate to Menu > Manage Playlists and
Content > Delete Portable Content.
4. Select the ’Yes’ option to permanently delete all Portable content on your Rio
Advanced Digital Audio Center.
Problem: I’m having trouble using my USB Ethernet adapter with the
Rio Advanced Digital Audio Center.
Troubleshooting measures:
At this time, supported USB Ethernet adapters include:
• LinkSys USB10T
• LinkSys USB100TX
• Dlink DSB-650TX (not DSB-650C)
• SMC 2202USB/ETH