Rio Audio Advanced Digital Audio Center - Manual (Page 67)

Rio Advanced Digital Audio Center User’s Guide | 65
Setting the clock
The clock feature comes on the display when the Rio Advanced Digital Audio
Center is in Sleep mode. By default an analog clock face will display — with the
time shown with clock hands — and the date displayed below. There are three
other options for the Sleep mode display: a digital clock with military time (24
hour), a digital clock with standard time, and a blank screen.
Even if the power is completely removed from the Rio Advanced Digital Audio
Center, the clock will maintain the correct time and date for more than a week.
Adjusting the appearance of the clock
1. Press the Standby button to put the Rio Advanced Digital Audio Center into
Sleep mode.
2. Press the Right Navigation Button to change the clock face to a digital
clock with military time.
3. Press the Right Navigation Button a second time to change to a digital
clock with standard time.
4. Press the Right Navigation Button a third time to change to a blank
screen.
5. Press the Right Navigation Button a fourth time to change back to the
original analog clock face.
Setting time and date
1. Press the Standby button to wake up the Rio Advanced Digital Audio
Center.
2. Press the Menu button to display the Main Menu screen.
3. Press Down on the Navigation Button to highlight Setup Menu.
4. Press Select on the Navigation Button to display the Setup Menu screen.