Rio Audio Advanced Digital Audio Center - Manual (Page 41)

Rio Advanced Digital Audio Center User’s Guide | 39
7. Remove Tracks from Transfer Queue This option shows the tracks you
have selected for your CD. CD percent used displays in the left part of the
screen. If the CD is over 100% full, use this screen to choose tracks to
remove from the CD by highlighting them, then pressing Select. The Rio
Advanced Digital Audio Center prompts you with an ‘...are you sure?’
message. Press Yes to delete the track.
8. Erase CD Choose this option to erase your rewritable CDs. The CD must
be an erasable type for this option to work.
9. Record CD Now Choose this option to start writing the CD. The Rio
Advanced Digital Audio Center creates a CD image, then writes the CD.
When the CD is finished, a ‘Record Complete’ message displays, and the CD
automatically ejects if you selected the Eject CD When Completed box.
10. Eject CD When Completed Select this box to automatically eject the CD
when recording is completed. Scroll down on the main Transfer to Data
CD or Transfer to Audio CD screen to see this box.