Radio Shack ET-1124 - Manual (Page 12)

12
To stop the beeping sooner, press any
key on the handset except
TALK . If you
receive an incoming call, pressing TALK
will answer the call and simultaneously
stop the beeping.
MEMORY DIALING
The phone can store up to 10 numbers
that you can dial by entering a memory
location number (
0 – 9 ).
Storing a Number in Memory
Note: An error tone sounds and the
phone exits the storing process if you
wait more than 20 seconds between
each key press.
1. Lift the handset.
2. Press MEM . The TALK/BATT indica-
tor blinks.
3. Enter the number and any tone
mode changes or pause entries
(see “Entering a Pause”).
Notes:
• Each number you store can be up
to 20 digits long.
• If you try to enter more than 20
digits, the phone sounds an error
tone and exits the storing pro-
cess. Start over from Step 2.
• Each tone or pause entry uses
one digit of memory.
4. Press MEM , then enter the memory
location number ( 0 – 9 ).
The handset sounds a long beep to
indicate that the number is stored.
5. For each stored number, write the
person’s or company’s name next to
the appropriate location number on
the supplied memory directory
sticker. Peel the backing off the
sticker and attach it to the phone.
To replace a stored number, simply
store a new one in its place.
MEM