ResMed Flow Generator S8 Elite System - Manual (Page 25)

E
NG
LISH
21 H OW TO U SE THE D ETAILED M ENU
H OW TO C HANGE THE S MART S TART S ETTING
SmartStart enables your device to start automatically when you breathe into the mask.
Scroll to SMARTSTART and select Change (Left key).
Press the Up or Down keys
to change the option to ON or OFF.
H
OW TO C HANGE THE L EAK A LERT S ETTING
Leak alert indicates when a high mask leak is present.
Scroll to LEAK ALERT and select Change (Left key).
Press the Up or Down keys to
change the option to ON or OFF.
R ESULTS M ENU
Select Enter (Left key) on the Results menu to access the options in this menu.
Note: Your clinician may have customised your device to display Smart Data. Contact
your clinician for further details about Smart Data.
V
IEWING U SAGE I NFORMATION
You can view the total number of hours of treatment (USED HRS) and the number
of sessions for which the
S8 E LITE
was used in a usage period (USAGE).
O PTIONS M ENU
Select Enter (Left key) on the Options menu to access the options in this menu.
H
OW TO CHANGE THE LANGUAGE SETTING
Scroll to LANG and select Change (Left key). Press the Up or Down keys until you
see the language that you require.
S ERVICING M ENU
Select Enter (Left key) on the Servicing menu to access the options in this menu.
You can view the current software version installed on your unit (SW); the serial
number of the printed circuit board in your device (PCB); and the serial number of the
device (SN).