ResMed Flow Generator S8 Elite System - Manual (Page 36)

32
The following message
is displayed on the
LCD after you try to
update the settings
using the Data Card:
Settings Invalid
Remove Card
The identification details on the
Data Card do not match the
details on your device. Contact your clinician
immediately.
The following message
is displayed on the
LCD after you try to
update the settings
using the Data Card:
Settings Error
Remove Card
There is a data error on the Data
Card. Contact your clinician
immediately.
The following message
is NOT displayed on
the LCD after you try
to update the settings
using the Data Card:
Settings Success
Remove Card
The settings were not updated. Contact your clinician
immediately.
Problem Possible Cause Solution