Rosewill RCW-605. - Manual (Page 6)

5
User Manual USB TO IDE 2.5”+3.5”+SATA Cable RCW605
d. 5.25" ATAPI
4. Plug the power adapter to power source and turn on the power
(Please make sure the voltage is between 00~240V)
5. Plug the USB2.0 cable to PC and wait for PC auto-detection.
Driver is needed only in old system such as Windows 98.
Please inset the driver disk when your system can’t complete
the installation process. Windows will auto-install after it detects
the driver disk and choose the most suitable driver for your system.
(Please notice the direction of USB port)