ROWENTA TO 810 VENUS - Manual (Page 9)

9
FOR YOUR INFORMATION ( ▲):
( ▲ ) On electronic models, the control lever can only be locked in the lower position when the toaster is plugged in.
( ▲ ) Any bread extending beyond the toaster slots will not be toasted.
( ▲ ) Do not force the control lever as you may damage the mechanism.
( ▲ ) When toasting currant buns or teacakes, remove any loose currants from the bread before placing them in the
toaster. Loose currants may fall into the appliance and damage the toaster.
(
▲ ) Do not use any abrasive cleaning agents (no soda-based scouring products, no scouring pads...), no metallic
utensils, metal scouring pads etc.
(
▲ ) Use just a soft cloth or a slightly damp sponge with a little washing up liquid.
( ▲ ) The packaging box may be recycled, but it may be useful for returning the appliance to an authorised Service
Dealer if necessary.
NEW TECHNOLOGY: INTEGRATED WARMING PLATE
SYSTEM USED FOR WARMING CROISSANTS, TEA
CAKES, PITTA BREADS, ROLLS, CRUMPETS, MUF-
FINS, BAGELS AND NAANS AND OTHER BREAD
PRODUCTS…
Use this toaster’s exclusive, integrated warming plate
feature to reheat croissants and rolls…
Do not warm sugared or fatty product(s) on the war-
ming plate to avoid them melting in the toaster and
damaging the heating element.
Place the bakery product(s) directly on the integrated
warming plate designed for this purpose ▲ - Fig.
Up to 4 products can be warmed at one time (ie 4 crois-
sants or tea cakes).
Lower the control lever once until it locks in the low posi-
tion. Select the "warming croissants and rolls" button .
The toaster is now on, and heat is rising through the
warming plate to evenly heat bread rolls on top.
The toaster stops automatically and the control lever
springs up - Fig.
To reheat the other side, turn the bakery products over
using oven gloves or bread tongs if necessary as the
metal croissant warmer may still be hot ▲ - Fig.
(Bread tongs and oven gloves not provided with the toaster)
For an optimum result, press the lever control down
a second time and then press on the “Warming crois-
sants and rolls” button
,the heat rises through the
warming plate and does not toast the bakery product
being warmed - Fig.
The bakery product(s) can be left on the warming plate
for a few minutes and they will remain warm.
MAINTENANCE, CLEANING AND STORING ▲
The toaster is equipped with browning sensors. Be
sure to clean the toaster regularly and to handle it
carefully. Always unplug the toaster and let it cool
before any cleaning or handling.
Wipe the outside of the toaster, the cord and the war-
ming plate with a damp cloth or a slightly damp sponge
with a little washing up liquid. Dry thoroughly - Fig.
For removal of the Integrated warming plate:
Grip the metal warming plate by the middle and gently
pull until it becomes detached. Clean with washing up
liquid, then dry thoroughly - Fig. -
For replacing the warming plate on the top, insert the
4 small tongues in the metal support in the correspon-
ding slots on the toaster and check that it is correctly in
place before each use ▲ - Fig.
To clean the crumb tray
Pull out the tray completely. Remove the crumbs - ▲
Fig.
Wipe it clean. Do this regularly, after each use if possible
(toasting or re-heating).
If crumbs or crusts remain inside the heating elements,
remove the warming plate and turn the toaster upside
down, so that these remaining crumbs fall out.
Replace the crumb tray and the metal warming plate
carefully.
For appliance with a metallic chrome finish:
Do not use any cleaning products designed for metals;
use a soft cloth with a window or glass cleaner.
Wind the cord around the cord storage area under the
toaster - Fig. 15
11
14
13 12
10
6
9
6
8
2749-3304044 exe VENUS FAAH 25/09/02 15:25 Page 9