Raymarine VolvoPenta IPS Autopilot System DPU - Manual (Page 3)

3
Please refer to the back of this handbook for a detailed schematic diagram
1.2 Parts Supplied
s
Additional parts required
To complete the installation you will also require the Autopilot Interface kit from
Volvo Penta. Part Number 3819744, comprising of a Gateway, Y split, Assembly
instruction and tie wraps.
D8065-1
Data Processing Unit
(DPU)
Volvo Penta IPS System - Top Level Schematic
Fluxgate
Compass
ST6/7/8001
Control Head
IPS S3G
Course Computer
to Volvo Penta
autopilot interface
Grounding cable, 2 meters
Plug to unterminated
(supplied with the S3G)
D8035-2
Terminator
Plug
SeaTalk 2 Cable, 1.0 meter
Plug to unterminated
SeaTalk 2 Cable, 0.4 meter
Plug to unterminated (x2)
NMEA 0183 Cable,
0.4 meter unterminated
Data Processing Unit
(DPU)
Tie Wraps
SeaTalk Cable, 1 meter
to unterminated
5-way Junction Block
Data Processing Unit - Parts Supplied.
Junction Box
Ferrite
(x5)
Raymarine VP interface cable
(Connector to unterminated.
Supplied with the S3G)
CAUTION DO
NOT
CONNECT
TO
NMEA2000 BUS
87054_3.book Page 3 Tuesday, July 18, 2006 8:49 AM