Ryobi P420 - Manual (Page 9)

9
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Failure to heed
this warning could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
FEATURES
KNOW YOUR ANGLE GRINDER
See Figure 1.
The safe use of this product requires an understanding of the
information on the product and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
WRENCH STORAGE SLOT
The wrench can be conveniently stored in the side handle
storage slot when not in use.
LOCK-OFF BUTTON
Your grinder is equipped with a lock-off button which reduces
the possibility of accidental starting.
ROTATING FOOT
The foot of the grinder can be rotated up to 270° to the left
for easier access to hard to reach areas. Stops are located
at 90°, 180°, and 270°.
SIDE HANDLE
The side handle can be installed on the top, left, or right side
of the grinder for stabilization and must be used during all
operations. The side handle provides convenient ease of
operation for the operator.
SPINDLE LOCK
The spindle lock secures the spindle so that only one wrench
is needed to change the grinding wheel.
TOOLLESS GUARD
A toolless guard deflects sparks and metal chips during
use.
UNPACKING
This product requires assembly.

Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Angle Grinder with Guard
Clamp Nut
Disc Flange
Grinding Wheel
Side Handle
Wrench
Operator’s Manual
ASSEMBLY