Radio Shack 32-2058 - Manual (Page 15)

15
Beyond the Basics
using a microphone
using an XLR microphone
To mix the XLR microphone with other audio input sources,
adjust DJ MIC LEVEL to increase or decrease microphone
volume. Set DJ MIC LEVEL to 0 when you are not using the DJ
microphone.
using the AUX microphone
To mix the AUX microphone with other audio input sources,
set AUX MIC/LINE to MIC. Adjust AUX LEVEL to increase or decrease
microphone volume. When you are not using the AUX
microphone, set AUX MIC/LINE to LINE. When set to LINE, you can
mix the output from the device connected to the AUX LINE MONO
jack.
using talkover
Press TALK OVER to reduce audio input sound so that the
microphone output is heard over the music. Rotate MUTE LEVEL
to adjust the background music volume while using talkover.
Press TALK OVER again to turn it off. All audio inputs, including
the microphones, play at the same output level.
PAN
To play either microphone or the AUX LINE output on the left or
right channel, adjust the DJ or AUX PAN control. Turn it to L to
play through the left channel, to R to play through the right
channel, or to any other position between L and R to balance
sound through both channels.