Radio Shack 32-2058 - Manual (Page 18)

18
Beyond the Basics
using echo
The mixer plays echo effects, and lets you adjust echo delay,
number of echo repeats, and the echo’s volume. The echo is
applied to the sound before all the inputs are mixed.
1. Set ECHO to MIC to apply the echo effect to the
microphones and AUX LINE input.
2. Set ECHO to MUSIC to apply the echo effect to the channel
outputs.
3. Set ECHO to OFF to turn off the echo effect.
adjusting echo delay, repeat, and volume
ECHO DELAY lets you adjust the time interval between echoes.
Set ECHO DELAY to 0 for minimum delay, and to 10 for maximum
time delay.
ECHO REPEAT lets you control the length of time a tone is
repeated (reverberation). Set ECHO REPEAT to 10 for the longest
time repeat and to 0 for the shortest.
ECHO LEVEL lets you adjust the echo output level. Rotate
ECHO LEVEL toward 10 to increase the echo level, and toward 0
to decrease it.
playing the signal from the sound effect
device
To play signals from the device connected to the EFFECT jacks,
set RECEIVE to ON. Rotate RECEIVE to adjust the volume of the
device connected to the EFFECT jacks without changing the
sound effect device’s volume. Rotate RECEIVE toward 10 to
raise the volume and toward 0 to decrease it.
When you are not using the connected inputs, set RECEIVE to
OFF.