Radio Shack 32-2058 - Manual (Page 8)

8
The Basics
connecting a lamp, headphones and mic
listening safely
Do not listen at extremely high volume levels. Extended,
high-volume listening can lead to permanent hearing loss.
To protect your hearing when using headphones, always
follow these guidelines to set the listening volume:
• Set CUE LEVEL (headphones volume) to minimum before
putting on your headphones.
• After you put on the headphones, adjust CUE LEVEL to a
comfortable listening level. Do not increase the CUE LEVEL
setting. Over time, your ears adapt to the volume level.
12V/3W MAX LAMP — connect a 12V
DC/3W BNC lamp (not supplied) to
light up the mixer’s controls. DJ MIC — connect a microphone
with an XLR plug here.
PHONES — connect a pair of stereo headphones
(not supplied) with a
1 /
4
-inch plug. You can then
listen and locate a section of music to mix.