Radio operation – Radio Shack CD-3319 User Manual
Page 10
10
RADIO OPERATION
Warning: To protect your hearing, set
VOLUME
to its lowest setting before
you turn on the radio.
Follow these steps to use the radio.
1. Set
FUNCTION
to
RADIO
to turn on
the radio. The POWER indicator
lights.
2. Set
BAND
to
FM
or
AM
.
3. Adjust
TUNING
to the desired sta-
tion.
4. Set
MODE/BEAT-CUT
to
STEREO
(
0
or
1
) for stereo sound on FM
stations.
Notes:
• For the best AM reception,
rotate the CD-3319 to position
the built-in AM antenna.
• For the best FM reception, fully
extend the telescoping an-
tenna and swivel it to the posi-
tion that produces the best
reception.
• The FM STEREO indicator
lights when you receive an FM
signal in stereo.
• If FM stereo reception is noisy,
set
MODE
/
BEAT-CUT
to
MONO
.
The sound is no longer in ste-
reo, but reception should
improve.
5. Adjust
VOLUME,
TONE
and
BAL-
ANCE
to the desired levels.
6. Press
E-BASS
to enhance the
bass sounds while playing the
radio. Press the button again to
turn the extended bass system off.
7. Set
FUNCTION
to
TAPE
to turn off
the radio.
14-543.fm Page 10 Wednesday, June 30, 1999 3:52 PM