Connecting an auxiliary audio source – Radio Shack CD-3319 User Manual
Page 6
6
Connecting the Speaker
Wires
Follow these steps to connect the
speaker wires to the CD-3319.
1. Unwind as much speaker wire as
you need from the back of each
speaker, then slide the wire
through one of the slots on the
back of each speaker to hold it in
place.
2. Insert the left speaker’s plug into
SPEAKER L
on the back of the
CD-3319, then insert the right plug
into
SPEAKER R
.
Note: Be sure to match the posi-
tive side of the plug to the positive
side of the terminal, and the nega-
tive side to the negative.
CONNECTING AN
AUXILIARY AUDIO
SOURCE
To connect an auxiliary audio source
to your CD-3319, such as a TV or
VCR, plug the audio source’s left and
right line level audio wires into
AUX
L
(left) and
AUX R
(right).
Set
FUNCTION
to
AUX
to select and
listen to an auxiliary audio source.
14-543.fm Page 6 Wednesday, June 30, 1999 3:52 PM