Radio Shack CD-3319 - Manual (Page 17)

17
CASSETTE PLAYER OPERATION
LOADING A CASSETTE
TAPE
Note: Take up any slack in the tape
by turning the cassette’s hub with a
pencil. If you do not remove excess
slack, the tape might become tangled
in the record/playback mechanism.
Avoid touching the tape.
1. Press STOP/EJECT to open
the cassette compartment cover.
2. Insert the cassette tape into the
tape guides on the compartment
door, with the side you want to
play facing you and the exposed
tape edge facing down.
3. Close the cover.
PLAYING A CASSETTE
TAPE
1. Set FUNCTION to TAPE .
2. Load a cassette tape.
3. Press PLAY . The POWER indi-
cator lights and the tape player
plays the cassette tape until it
reaches the end, then it automati-
cally stops.
Notes:
• To temporarily stop playback,
press PAUSE . Press PAUSE
again to resume playback.
14-543.fm Page 17 Wednesday, June 30, 1999 3:52 PM