Rangemaster Toledo FS Hob - Manual (Page 21)

21 U18900-02
Technical Data
The hotplate is an independent Class 3 built in unit.
This hotplate is category II
2H3+
It is supplied set for group H natural gas. A conversion kit from NG to LP gas is packed with the hotplate.
INSTALLER: Please leave these instructions with the User.
DATA BADGE LOCATION : Base of the hotplate.
Country of Destination: GB/IE
Gas Electric
Natural Gas 20mbar 220 - 240V 50Hz
Butane 29mbar
Propane 37mbar
(See appliance data badge for test pressures)
Dimensions
Overall width 1173mm
Overall depth 499mm
Space for fixing See ‘Positioning of Hotplate’
Minimum space above hotplate 650mm
Connections
Gas: Electric
Rp 1/2 at rear right-hand side 220 - 240V 50Hz
Ratings
Natural Gas L.P. Gas
Hotplate Injector Injector
Wok burner 3.65kW
internal 80
3.5kW (255g/h)
internal 54
external 129 external 77
Large Burner 3.0kW 134 3.0kW (218g/h) 87
Medium Burners 1.7kW 109 1.7kW (124g/h) 68
Small Burner 1.0kW 75 1.0kW (73g/h) 51
Gas burner inputs based on Gross Calorific Value
Maximum total electrical load at 230V 50 W (approximate total)