RCA STAV3860 - Manual (Page 25)

25
RECALLING MEMORIZED STATIONS
Having memorized up to 30 stations (see "Memorizing Stations" on page 24), you can listen to a station
with a couple of button presses.
The receiver and the remote control must both be set to tuner mode for AM/FM station listening.
3 4 1
CLASS
MPX
D. ACCESS
SOURCE
SOURCE SELECT TAPE
CD TUNER
CH SELECT
FUNCTION
FL
DIMMER RECEIVER
* &
&
#
#
@
@
EFFECT
ASMS SEARCH
T.TONE
FM/AM
MUTING
VOLUME
DSP MODE 2
! !
CHANNEL
LEVEL
DISC/STATION
$ $
DECK 1
DECK 2
TUNING
TUNING
1 2 3 4
5 6
9 0
7 8
POWER
POWER
STAV-3860
AUDIO/VIDEO SYSTEM REMOTE
OSR
SORROUND
3
1
2
4
3 2 4
memo
1 Use the FUNCTION button to put the receiver in tuner mode.
On the receiver, press the FM/AM button to select the tuner
mode.
2 Press the TUNER button on the remote control to put it in tuner
mode.
3 Press CLASS to select the class in which the station is stored.
Repeatedly pressing this button cycles through the three
available classes, A, B and C.
4 Use the STATION
2 3 buttons to select the station memory in
which the station is stored.
Alternatively, recall the station memory using the number
buttons on the remote control.
If the receiver is left disconnected from the AC power
outlet for a lengthy period, the station memories will be
lost and will have to be reprogrammed.
3 Repeatedly press CLASS to select one of the three classes.
4 Repeatedly press STATION
2 3 to select the desired station
memory number.
After choosing the location you want, the preset class and
number blink for about 5 seconds and the receiver stores the
station.
Repeat steps 1 to 4 to memorize up to 30 stations.