RCA STAV3860 User Manual

Page 7

Advertising
background image

7

Operating Range of Remote Control Unit
The remote control may not work properly if:

30

30

23 ft.

1 2 3

4 5 6

+

+

-

-

PREPARING THE REMOTE CONTROL

Dry Cell Batteries (not included)

(AA size IEC R6P x 2)

Loading the batteries

CONTROL

OUT

OUT

IN

CONTROL

The FUNCTION & SOURCE SELECT Buttons on the Remote Control
Please note that the remote control has two types of buttons, one called

FUNCTION

and a set of buttons

called

SOURCE SELECT

. Use the

FUNCTION

button to choose the component you want to listen to

(CD, CDR/TAPE, TUNER, etc.) and use the

SOURCE SELECT

buttons to change which component the

remote control itself will operate. Thus, if the STAV-3860 is in TUNER mode, for example, and you want
to listen to your CD player, you need to select the CD mode with the

FUNCTION

button.

CAUTION:

Incorrect use of batteries may result in
such hazards as leakage and bursting.
Observe the following precautions:

• Never use new and old batteries to

gether.

• Insert the plus and minus sides of

the batteries properly according to
the marks in the battery case.

• Batteries with the same shape may

have different voltages. Do not use
different batteries together.

memo

• There are obstacles between the remote

control and the receiver's remote sensor.

• Direct sunlight or fluorescent light is

shining onto the remote sensor.

• The receiver is located near a device that is

emitting infrared rays.

• The receiver is operated simultaneously

with another infrared remote control unit.

Operating other RCA Components

You can also control RCA professional
series components by pointing the
receiver's remote control directly at the
component. This type of operation
does not require control cords.

By connecting a control cord (optional), you can
control other RCA professional series equipment
using this remote control unit. Point the remote
control unit towards the remote sensor of this
unit, even when operating other equipment.

The remote control signals are received by the
remote sensor of this unit, and sent to the other
devices via the

CONTROL OUT

terminal.

memo

CONNECT TO CONTROL IN
TERMINAL OF OTHER RCA
PROFESSIONAL SERIES
PRODUCTS WITH OSR MARK.

REMOTE CONTROL UNIT

STAV-3860

OTHER RCA PROFESSIONAL
SERIES PRODUCTS WITH OSR
MARK

Advertising