RCA RP-9555 - Manual (Page 13)

11
Choosing Discs for Play
When you load five discs at one time, you can choose which
disc you want to play by pressing the DISC SELECT or the
corresponding DISC (1-5) buttons.
After the current disc finishes playing, the system moves on
to the next disc. If you want to listen to only one of the five
loaded discs, use the corresponding DISC (1-5) buttons .
DISC Buttons (1-5)
Press one the DISC (1-5) buttons to listen only to the current
disc. You can use this feature while in Shuffle or Repeat
mode, but if you press one of the DISC (1-5) buttons during
programmed play, the program feature is turned off.
Programming Play Order
You must be in Stop mode in order to program play order.
1. Press the PROGRAM button.
• PROGRAM blinks in the display.
• – – appears in the display beneath the TRACK
indicator.
• Pr 01 appears in the display indicating that this is first
programmed track.
2. Press the DISC SELECT button or the corresponding DISC
(1-5) buttons to choose a disc.
3. Press TRACK/SEARCH forward or TRACK/SEARCH
backward to choose a track.
4. Press PROGRAM to save the track in the program
memory.
5. Repeat steps 2-4 above to program up to 32 tracks.
• PF appears in the display when the program is full.
6. Press PLAY/PAUSE to begin programmed play.
ALL DISCS REPEAT
TIME TRACK DISC
Playing all discs
1 DISC REPEAT
TIME TRACK DISC
Playing current disc only
Track number
(04 indicates that
track 4 on current disc
has been selected) Program number
(01 indicates first
programmed track)
PROGRAM
TRACK DISC
Shuf fleShuf fleShuf fleShuf fleShuf f...
Turn on Repeat while you’re
shuffling play, and after all of the
shuffled tracks have been played,
they’ll play again...only not in the
same order.
Repeating a Program
When you program tracks into memory, you can repeat the
program by pressing the REPEAT button after the program
begins playing.