RCA RP-9555 - Manual (Page 16)

14
Using the Cassette Deck
Understanding the Buttons
If you know what each button does, it’s easy to figure out
how to operate the tape decks.
RECORD — Press to record from the radio, CDs, VIDEO 1, or
VIDEO 2. You can only record on Deck 1.
PLAY — Press to play cassettes.
REWIND — From stop mode, press to rewind the tape
toward the beginning.
FAST FORWARD — From stop mode, press to advance
the tape toward the end.
STOP/EJECT — Press to stop current tape activity, or to
open the cassette compartment door when no buttons are
active.
PAUSE — Press to interrupt tape play or record. Press a
second time to resume tape play or tape record mode.
Playing Cassette Tapes
You can play cassettes from either of the two tape decks.
1. Press TAPE function button to activate the cassette deck.
2. Press STOP/EJECT to open the cassette compartment door.
3. Insert a tape into the compartment door, and then close
the door securely.
4. Press REWIND or FAST FORWARD to move tape
to the desired starting point.
5. Press PLAY to begin playing the tape.
Automatic Stop Feature
When the tape deck is operating in any mode and the end of
the tape is reached, the system automatically shuts itself off
and returns all buttons to the off (up) position.
Recording from the Radio
1. Insert a cassette tape into Deck 1.
2. Choose the TUNER/BAND function and select a radio
station.
3. Press RECORD to begin recording.
4. Press STOP/EJECT to end recording.
DECK
1
DECK
2
PHONES
Erase Protection
When you record new material, the
cassette deck records over whatever
is on a tape. To protect a tape from
accidental erasure, break off one or
both plastic tabs (one for each tape
side) on the top of the cassette tape.
If you decide later to record on the
tape, seal the hole with a piece of
cellophane tape.
A 60
A
A A