Rangemaster 90 - Manual (Page 25)

25
You will need the following equipment
to complete the cooker installation
satisfactorily
STABILITY BRACKET
If the cooker is to be supplied with gas through
a fl exible hose, a stability bracket or chain must
be fi tted.
These are not supplied by with the cooker
but are available at most builders’ merchants.
GAS PRESSURE TESTER
FLEXIBLE GAS HOSE
Must be in accordance with the relevant
standards.
MULTIMETER
(for electrical checks)
You will also need the following tools:
1. Electric drill
2. Masonry drill bit
(only required if fitting the cooker on a stone or
concrete floor)
3. Rawlplugs
(only required if fitting the cooker on a stone or
concrete floor)
4. Steel tape measure
5. Cross head screwdriver
6. Flat head screwdriver
7. 4mm & 3mm Allen keys
8. Spirit
level
9. Pencil
10. Adjustable spanner
11. Screws for fittingstability bracket
Checking the parts
3 pan supports Griddle plate
Grill pan and trivet Levelling tool
Handyrack Meat tin
2 Main oven shelves
Tall oven shelves & shelf
supports.
Splashback & Plinth
Conversion kit from Natural
gas to LP gas