Rangemaster 90 - Manual (Page 9)

9
The Clock
You can use the timer to turn the ov ens on and
off. The clock must be set to the time of day
before the ovens will work.
Setting the time of day
Timer knob Adjusting knob
When the clock is fi rst connected the display will
fl ash ( ) and ( ) al ter nate ly.
To set the clock to read the time of day turn and
hold the Timer knob to the clock symbol (
)
and at the same time turn the Adjusting knob
left or right until the clock shows the time of day.
Remember this is a 24 hour clock. Let go of the
Timer knob and it will spring back to the vertical
( ) oven manual setting.
To time something that’s cooking
(minute minder)
Turn the Timer knob
to the right to the (
)
minute minder setting - it
should click into position.
Use the Adjusting knob to
set the time you need.
You can turn the knob back to the ( ) manual
setting to keep an eye on the time of day or
leave it in the ( ) minute minder position as the
time ticks down.
To stop the beeper when it sounds
Turn the Adjusting knob anticlockwise
To stop automatically
Use when you have started the oven manually.
Turn the Timer knob to the
(
) position.
Use the Adjusting knob to
set the time you need.
‘Stop Time’ shows.
AUTO will show in the
display.
Turn the Timer knob to the ( AUTO ) setting.
When your cooking is fi nished the beeper
sounds. Turn the Timer knob to the vertical ( )
to return to manual cooking.
To start and stop the oven
automatically
Before you set the clock, you must have two
numbers clearly in mind.
The ‘cook time’, which is the period of time you
want the oven to cook.
The ‘stop time’, which is the time of day you
want the oven to stop cooking.
You cannot set a start time directly - this is set
automatically by setting the cooking period and
stop time.
Turn the Timer knob to the
(
) position.
Use the Adjusting knob to
set the ‘cooking time’ you
need.