Playing a tape, Playback, 22 playing a tape – RCA VR730HF User Manual
Page 24
22
Playing a Tape
Playback
To play a tape
1
. Turn on the TV and tune it to channel 3, 4, or the TVÕs video input
to see the picture from the VCR.
2
. Insert a tape in the VCR.
VCR automatically turns on. The cassette-in indicator (
) lights,
and the
VCR
indicator lights if the
AUTO TV/VCR
feature is set to
ON
. The tape automatically begins playback if the safety tab on the
cassette has been removed and the
AUTO PLAY
feature is
turned on.
3
. Press
PLAY•PAUSE
on the VCR or
PLAY
on the remote or VCR,
if necessary.
4
. Press
TRACKING
up or down on the remote or the VCR to remove
any streaks from the picture if necessary. See ÒManual TrackingÓ
section.
5
. Press
STOP•EJECT
on the VCR or
STOP
on the remote to stop the
tape.
6
. Press
REW
on the VCR or the remote to rewind the tape.
End of Tape
The VCR automatically rewinds the tape if it reaches the end of the
tape during playback.
Power Off
If you press
POWER
while a tape is rewinding, the VCR turns off
automatically when it is completely rewound.
6
. Press
STOP•EJECT
on the VCR to eject the tape once it is
completely rewound.
CHANNEL
REW
PLAY
FWD
POWER
TV•VCR
TRACKING
RECORD
STOP•EJECT
PAUSE
S•VHS AUTO
S•VHS
MONO
VIDEO IN
L•AUDIO IN•R
Safety Tab