RCA CC9360 - Manual (Page 99)

Other Information
Chapter 7 97
252885 A/V Cable
Replacement for the included A/V cable. Used to
attach the camcorder to an external component like
a TV or VCR.
H2011 DV Cable
Used to connect the camcorder to a compatible PC
with a IEEE1394 DV interface.
Cautions:
• Before using a tripod, make sure it is
stable enough to hold the camcorder
without falling over. Do not transport
the camcorder attached to the tripod.
• When attaching your camcorder to a
tripod, be careful not to force the tripod
screw into the camcorder’s tripod
mounting hole.
• The tripod screw should not protrude
into the camcorder more than
approximately three-eighths (3/8) of an
inch. Forcing the screw could damage
the mounting hole on the bottom of the
camcorder.
Using the Optional AC088 Tripod
Mounting the camcorder on a tripod, such as AC088, keeps the camcorder steady and
produces excellent video results.
This tripod’s fluid-effect head provides smooth camera pan and tilt. The quick-release
mount makes it easy to attach or remove the camcorder. The grooved, tubular 3-section
leg design folds down to 26" when not in use. Rubber feet allow for sure footing.