Voice activated recording with timer – Roberts Radio C9950 User Manual
Page 17
If you need any further advice, please call our Technical Helpline on
0208 758 0338 (Mon-Fri)
16
Voice activated recording with timer
Your cassette recorder can also be programmed for a timed voice
activated recording. This might be used to record sounds in a room at a
certain time of day or to record a conference that you are unable to attend.
1.
For highest quality recordings set the Speed switch to the "Normal"
position. For maximum recording time set the Speed switch to the
"Quarter" position
2.
Set the timer as instructed on page 13-15.
3.
Insert a cassette with the tape facing towards you and the side on
which you wish to record uppermost. Close the cassette compartment.
Reset the Tape counter if desired.
4.
Set the Voice Activated switch to the 'On' position.
5.
Press down the Record button.
6.
The timer will activate the recorder but recordings will only be made
when sound is present at the internal Microphone socket or Line in
sockets.