Roberts Radio C9950 - Manual (Page 22)

21
Specifications
Power Requirements
Mains : 230V AC via adaptor supplied
DC : 6.0V
Batteries : 4 x LR14 (C size) batteries
Circuit Features
Semiconductors: 6 IC's , 28 Transistors , 27 diodes , 1 FET and 1
LED
Loudspeaker 75mm dia
Output Power 320mW
Headphone socket 3.5mm stereo
Microphone socket 3.5mm stereo input sensitivity 0.5mV
Line Input socket 3.5mm stereo input sensitivity 200mV
Timer activate socket 3.5mm
General
Do not allow this unit to be exposed to water, steam or sand. Do not leave
the unit where excessive heat could damage such as in a parked car
where the heat from the sun can build up even though the outside
temperature may not seem too high
The Company reserves the right to amend the specification without notice.