Roberts Radio C9950 - Manual (Page 19)

If you need any further advice, please call our Technical Helpline on
0208 758 0338 (Mon-Fri)
18
Recording a telephone call
It is possible to purchase a BT socket recording lead from your local
electronic component specialist (e.g. Maplin).
1. Connect the telephone recording lead to the Mic socket on the front
of your cassette recorder.
2. Connect your telephone to the telephone record adaptor. (Refer to
instructions included with the adaptor.)
3. Set the Speed switch to the required position.
4. Set the Voice Activated switch to the 'On' position.
5. Press the Record button.
6. Set Voice Sensitivity switch to position 2. Check recording starts
when telephone conversation begins.
7. On the bottom of your cassette recorder there is a switch to insert a
Beep into your recorded conversations at regular intervals to advise
both parties that they are being recorded. Set the Beep switch to the
'On' position to activate this function.