RCA Lyra2 RD 2209 - Manual (Page 23)

21
Model RD2204 Only: Car Kit
1. Insert the plug on the cassette
adapter into the headphone jack
on the player. If the headphone is
attached, remove it.
2. Set your cassette player to your
normal listening level.
3. Insert the cassette (Side A up)
into your cassette player making
sure the cord is placed in the
correct position for your type of
player.
4. Attach the car cord adapter to the
Lyra as shown above.
5. Remove the cigarette lighter from
the socket, and insert the car cord
into the socket.
6. Insert the CompactFlash card you
wish to play into the player, start
playing the card, and set the
volume at a medium level.
7. Control the volume with the
cassette player.
8. Remove the cassette adapter from
the cassette player when you are
finished.
Included Accessories
The car kit is included with Model RD2204 or can be purchased as optional
accessories from your local dealer or by phone order on page 22. This
accessory kit includes a car cord adapter (#54097) and a cassette adapter
(#54095). The car cord adapter lets you power your Lyra from the cigarette
lighter socket of a car, truck, or RV. It converts 12-volts to a 6-volt output.
The cassette adapter lets you listen to the Lyra in an automobile or RV safely
without having to wear headphones.
Cautions: Make sure to place the wire securely into the slot on the
cassette in the correct direction for the type of player you have.
The car cord adapter is designed to be used only with vehicles
having negative ground electrical systems. Use of any other car cord
adapter may damage your Lyra and void your warranty.
Make sure the Lyra’s power is turned off before removing the car
cord’s plug from the cigarette lighter socket.
Slot for Wire
PLAY
DSP LIGHT
STOP • OFF SKIP/REV. SKIP/FWD.
MODE
SIDE A
Headphone
Jack
Cigarette
Lighter Socket
Car Cord Adapter
Cassette Adapter