RF-Link NL6000 - Manual (Page 11)

RF Neulink NL6000 User Guide 11
UHF RADIO
SPECIFICATIONS
Model Numbers NL6000
Transmission frequencies 450-470 MHz & 400-420 MHz
Current Drain at 12 V:
IDLE radio channel
0.2 amps
Receive 0.2 amps
Transmit: 0.5 watts 1.0 amps
Transmit: 1.0 watts 1.2 amps
Transmit: 2.0 watts 1.6 amps
Transmit: 3.0 watts 1.9 amps
Transmit: 4.0 watts 2.2 amps
Transmit: 5.0 watts 2.6 amps
Transmit: 6.0 watts 3.1 amps
Transmitter:
RF power 1 to 6 watts
Modulation 4-FSK with spectral precoder
Frequency stability 1.5 ppm
Channel spacing 12.5 kHz (narrow), 25 kHz (wide)
Channel step size 6.25 kHz UHF
Duty cycle 5% to 75%, depending upon
voltage, power level, and ambient
temperature
RF load impedance
50 ohms
Receiver:
Sensitivity (95% reliability, 500 user
data bytes per packet)
Basic Telemetry Mode 109 dBm
Enhanced Telemetry Mode 115
dBm
Mobile Data Mode 115 dBm
Selectivity 60dB min (narrow), 70dB min (wide)
Intermodulation 70dB min
RF input impedance
50 ohms