RIDGID R2400 - Manual (Page 9)

9
FEATURES
KNOW YOUR LAMINATE TRIMMER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
TOGGLE SWITCH
The toggle switch is located on top of the motor housing.
The toggle switch features a soft start to prolong motor
life and gives the operator more control when starting the
laminate trimmer.
ELECTRONIC FEEDBACK
An electronic speed control module senses the load applied
to the motor, and increases or decreases motor voltage to
compensate for and maintain desired RPM.
VARIABLE SPEED DIAL
The variable speed dial, located on the top of the motor
housing, enables you to adjust the speed of the bit from
20,000/min to 30,000/min.
LIGHTED PLUG
The lighted plug with tool icon helps to easily identify live
tools.
MOTOR
The laminate trimmer has a powerful 6 amp permanent
magnet motor with sufficient power to handle many trim-
ming jobs.
DEPTH OF CUT SCALE
The laminate trimmer has an adjustable depth of cut scale
located on the side of the motor housing.
EDGE GUIDE
The edge guide will keep the bit a certain distance from the
edge of a straight workpiece.
BEARING GUIDE ASSEMBLY
The bearing guide assembly can be used to guide the bit
along the edge of a workpiece that is curved. The bearing
guide assembly features a micro adjust screw.
UNPACKING
This product requires assembly.
n
Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
n Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
n Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
n If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACKING LIST
Laminate Trimmer
Wrenches (2)
Edge Guide
Bearing Guide Assembly
Guide Bars (2)
Bearing Flush Trim Bit
Carrying Case
Operator’s Manual
ASSEMBLY
WARNING:
If any parts are missing do not operate this tool
until the missing parts are replaced. Failure to
do so could result in possible serious personal
injury.
WARNING:
Do not attempt to modify this tool or create
accessories not recommended for use with this
tool. Any such alteration or modification is misuse
and could result in a hazardous condition leading
to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly
is complete. Failure to comply could result in
accidental starting and possible serious personal
injury.