Renesas REJ10J1837-0100 - Manual (Page 20)

High-performance Embedded Workshop 1. Overview
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
5
System Tools toolbar
You can add an external tool button, to which an external tool menu has been assigned, on the right to the system tool
button on the toolbar as shown below.
When the Standard toolbar is docked, it has a Control bar as shown in the figure below. If you want to move the docked
Standard toolbar, click and drag its Control bar to the new location. The figure below shows the Standard toolbar when
it is docked and also when it is floating.
To dock a toolbar
Select one of the following operations:
• Double-click on the title bar of a floating toolbar, OR
• Drag the title bar of a floating toolbar and draw it toward an edge of a docked window, menu bar, toolbar or
the High-performance Embedded Workshop main frame, on whose edge you would like to dock the window,
until the shape of the floating bar changes.
To float a toolbar
Select one of the following operations:
• Double-click on the control bar of a docked toolbar, OR
• Drag the control bar of a docked toolbar and draw it away from the edge of the High-performance Embedded
Workshop main frame and from an edge of the other docked windows, menu bar or toolbars.
1.2.4 Workspace window
The Workspace window has four tabs (Projects, Templates, Navigation, and Test).