Renesas REJ10J1837-0100 - Manual (Page 38)

High-performance Embedded Workshop 1. Overview
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
23
The test support facility is available in the Test menu and in the pop-up menu of the Test tab of the workspace window.
The first step towards using the test support facility is to create a test suite (a set of tests). This is available on the Test
menu. Once a test suite is created, following operations can also be done in the Test tab of the workspace window.
Modify the test suite and specify macros to be executed during the test and the test image file for comparison.
Then select some test items to be saved a test image file. Acquire and save test image of the selected test items, which
you wish to use for comparison.
After completion of the test (macros) the selected test items are compared. The result is displayed in the test browser
window.
If there is any difference between the test result and the saved the test image file, the result of the test item is shown as
“FAIL”. You can view the details of the error by double-clicking the line of this test item.