Renesas REJ10J1837-0100 - Manual (Page 348)

High-performance Embedded Workshop 17. Using the Debugger
REJ10J1837-0100 Rev.1.00 Nov. 16, 2008
333
To specify the refresh interval, select Update Interval from the pop-up menu. This item is only selectable when it is
supported by the debugger.
17.5.3 Refreshing the Waveform window
Selecting Refresh Now from the pop-up menu immediately refreshes the window contents.
17.5.4 Specifying the refresh interval
You can specify the interval to refresh the Waveform window while the user program is running.
Support for this function depends on the debugger.
To specify the refresh interval
1. Right-click within the window to open a pop-up menu.
2. Select Update Interval. The Update Interval dialog box opens.
3. Specify the refresh interval in 10-ms units. The refresh interval is specifiable in the range from 10 to 10000 ms
and the default value is 1000 ms.
The specified refresh interval is applied to all Waveform windows.
The actual refresh interval may be longer than the specified value depending on the state of execution.
17.5.5 Zoom-in display
Selecting Zoom In from the pop-up menu displays the waveforms with the horizontal coordinate enlarged.
17.5.6 Zoom-out display
Selecting Zoom Out from the pop-up menu displays the waveforms with the horizontal coordinate reduced.
17.5.7 Resetting the zoom display
Selecting Reset Zoom from the pop-up menu displays the waveforms in its original size.
17.5.8 Setting the zoom magnification
In the Zoom Magnification submenu of the pop-up menu, the zoom magnification can be selected from 2, 4, or 8.