Priority all scan – Raymarine Ray54 User Manual
Page 35
Chapter 4: General Operations
25
In Saved Scan mode, only the channels that
have been saved in memory are scanned in
sequence. After the last saved channel
number has been scanned, the cycle repeats.
Saved Scan is demonstrated in the figure to
the left.
Note: Whenever Weather Alert is activated, the WX Alert channel is also
monitored during Saved Scan. If the WX Alert tone is detected, the scan is to
halted to receive the Weather Alert broadcast.
Priority All Scan
Press and hold the SCAN/SAVE key while All Scan is active to initiate
Priority Scan.
ALL PSCAN appears on the dot matrix display.
Priority Scan searches for activity on all
channels but alternates scanning the
Priority Channel 16 after each channel.
Priority Scan is demonstrated in the figure
to the left.
Note: Whenever Weather Alert is activated, the WX Alert channel is also
monitored during Priority All Scan. If the WX Alert tone is detected, the scan
is halted to receive the Weather Alert broadcast.