Priority saved scan, 11 adding channels to memory, To add channels to memory – Raymarine Ray54 User Manual

Page 36: Press and hold the scan/save key for 3 seconds

Advertising
background image

26

Ray54 VHF Radio

Priority Saved Scan

Press and hold the SCAN/SAVE key while Saved Scan is active to initiate
Priority Saved Scan.

SAVED PSCAN appears on the dot matrix display.

Priority Saved Scan is much like Priority
Scan except that the radio alternates
searching for activity on the Priority
Channel 16 and the channels stored in
memory.

Priority Saved Scan is demonstrated in the
figure to the left.

Note: Whenever Weather Alert is activated, the WX Alert channel is also
monitored during Priority Saved Scan. If the WX Alert tone is detected, the
scan is halted to receive the Weather Alert broadcast.

Press and hold SCAN/SAVE for 3 seconds to exit Priority/Priority Saved
Scan and return to All/Memory Scan.

Press and release the CLEAR/WX key to exit Priority/Priority Saved Scan
and return to the last-used channel.

4.11 Adding Channels to Memory

The Ray54 can store any channel. The stored channels are the ones scanned
in the Saved (Memory) Scan mode.

To Add Channels to Memory

1. During normal operation mode, use the CH knob to select the desired

channel for programming.

2. Press and hold the SCAN/SAVE key for 3 seconds.

Advertising