Raymarine Ray54 - Manual (Page 84)

74 Ray54 VHF Radio
Adding a New Group
1. From the DSC SETUP menu item described on page page 71, rotate the CH
knob until the arrow points to GROUP SETUP.
2. Press the CH knob to accept. If an existing Group name and MMSI ID
number are already stored, those values appear. If blank, <EMPTY 1>,
<EMPTY 2>, and <EMPTY 3> are shown to indicate that the Group IDs
have not yet been programmed into the radio.
3. Rotate the CH knob until the arrow points to the first available empty
group location.
4. Press the CH knob to accept. The first field for you to enter data is the
GROUP NAME.
5. Use the CH knob to modify the GROUP NAME field using the same tech-
nique described in Adding an Entry on page 59.